Alright so im having trouble and this will be long...
System crashed mid game no error
k no problem, have never had the issue before. Ill just take the sd out and delete some files, takes out sd, puts it right back in not doing anything with my pc cause I forgot to just reset the switch first to see if it fixes it lol.
Well when I tried to boot up again I got something I knew how to fix but needed my pc so I took out sd and put into pc, fixed it.
Went to boot up and got an SD NOT READ THING, over and over.
I first tried my old SD card of 200gb, formated to FAT32 and left it blank and put it in switch to boot. It booted fine but the settings where showing the SD card not being read.
I reset a few times and same thing.
I formated my first SD of 512gb, which had a lot of games installed , to FAT32 and put it in the switch blank.
Booted up and my screen froze on the Nintendo Switch logo for eternity. Also worth noting most times I tried this with only the 512gb sd there was a loud pop sound coming from sd card area.
Same thing kept happening, the 200gb would boot fine while not reading sd while the 512 froze. No sd booted fine.
Found a youtube vid showing how to take off the back panel and to push down on the SD readers ribbon a little so it could connect. This did nothing, I took the reader off eventually to look at the pins but underestimated just how small everything is
They may have looked fine but I dont have any microscopes laying around. Anyways I ordered a replacement sd reader for 10$ off of Amazon and it comes in a day. Hope thats it but if it's not is there anyone out there that can help
Forums
Topic: SD Reader problems
Posts 1 to 1 of 1
This topic has been archived, no further posts can be added.